高潮迭起av乳颜射后入,东北老女人高潮大叫对白,国产成人亚洲精品无码av大片,性一交一乱一伦一

中文
Polypropylene fibre
Release Time:2020-04-14 16:17:40      The number of clicks:507

Polypropylene fiber is composed of propylene polymerization, melt spinning, due to no polar group molecules, intermolecular force is small, and because of the molecular chain more smooth, so the glass transition temperature of polypropylene under 0 ℃, the fiber with must adopt isotactic polypropylene polymerization, make each atom of polypropylene macromolecule and groups in three dimensional space as a regular arrangement, can reach 165-170 ℃, melting point due to propylene attraction between the molecules is small, so the molecular weight of polypropylene resin in 200000 or more, the melt viscosity, therefore, when the melt spinning temperature control at above 100 ℃ higher than the melting point, generally is 285 ℃ or higher. The polypropylene molecular chain is pliable with good regularity, and it is easy to crystallize during spinning. The crystallinity of the primary fiber is up to 50%. When spinning, the temperature of the silk chamber is controlled below 30℃, so that the primary fiber can generate unstable pseudo-hexagonal crystals, which are easy to be stretched during post-processing. The preparation of coarse polypropylene fiber can also be used thin film method short-range spinning equipment, the extruder out of the cured film with grooves on the roller to split into fiber. Polypropylene fiber density is 0.91 g/cm', is the chemical fiber in the light of the species, fiber does not absorb moisture, under standard conditions the moisture regain rate is close to 0, dry and wet state performance without significant change, no mold and no moth. Because of the non-hygroscopicity, dyeing is difficult, the spinning dyeing method can be used to solve the problem of dyeing polypropylene, but the chromatography is not complete.

Polypropylene fiber strength and initial modulus are high, close to polyester, wear resistance and elasticity are good, but when the load increases, polypropylene fiber creep elongation is greater than polyester, under high stress modulus and fracture strength is higher than polyester, so polypropylene fiber is a strong and tough fiber.

Polypropylene fiber glass temperature is very low, so the heat setting effect is not stable. The softening point is 140-150℃, and the melting point is 165-173℃. It is melted on one side and burned slowly on the other side in the flame.

The thermal conductivity in the fiber is the lowest, good insulation performance. Polypropylene is a carbon chain polymer, macromolecular chain without weak links, chemical stability is good, in addition to chloric acid, nitric acid and other oxidation acid destruction, the resistance to other acids is good. Alkali resistance, in addition to the strong caustic soda,

The alkali has no effect on the strength of polypropylene. Polypropylene resistant to general organic solvents such as ethanol, ethyl ether, benzene, acetone, gasoline, tetrachloroethylene are not dissolved in hot benzene and gasoline swelling, can dissolve in hot chlorobenzene, tetrahydronaphthalene and dechydronaphthalene.

Polypropylene fiber has good electrical insulation performance, but it is easy to accumulate static electricity in processing, and the spinnability of pure polypropylene fiber is poor.

Polypropylene fiber is easy to age, because the hydrogen atom on the tertiary carbon atom in the polypropylene macromolecular chain is quite active, which is easy to be affected by light, heat and so on and produces active free radical, and causes the free radical chain degradation reaction, which promotes the break of macromolecular chain. When isotactic polypropylene fibers are stored at 50℃ for one year, they lose their value. In order to prevent aging, spinning often add anti-aging agent, in order to slow down the aging process, the better effect of o-hydroxydiphenyl ketone and nickel containing metal organic compounds, adding 1% to 3% graphite to prevent photosensitive aging is the most effective, but not suitable for the production of white fiber.

Polypropylene fiber due to the manufacturing cost is low, the proportion of small and excellent physical and chemical properties and got rapid development, in addition to a large number of used in the manufacture of industrial fabrics, non-woven fabric, also began to dress, especially because of the polypropylene fiber has a core role in absorption, can through the fabric of the capillary water vapor transfer out, itself is no absorption effect, make the skin dry, is of strong manufacturing sportswear, garment and other manual labor permeable fabric, etc.


News of interest
Previous:No
Next:Propane fabric production essentials

Back to list

LINKS:

all rights reserved:Jiangsu Hezhong Cloth Industry Co., Ltd.

Design production:winsharing
痉挛高潮喷水av无码免费| 亚洲日韩欧美一区久久久久我| 日韩精品无码一本二本三本色| 天天爽夜夜爽夜夜爽| 日本熟妇人妻xxxx| 艳妇乳肉豪妇荡乳av无码福利| www国产精品内射| 亚洲欧洲中文日韩久久av乱码| 一本一道av无码中文字幕| 蜜桃一区二区三区| 午夜亚洲www湿好大| 色婷婷一区二区三区四区成人网 | 久久av无码专区亚洲av桃花岛| 天天躁日日躁狠狠躁欧美老妇小说| 久久综合九色综合久99| 亚洲精品国产福利一二区| 老太脱裤子让老头玩xxxxx | 久久精品国产网红主播| 柠檬福利精品视频导航| 国产伦精品一区二区三区免费| av色欲无码人妻中文字幕| 成人国内精品久久久久一区| 99精品国产99久久久久久97| 图片小说视频一区二区| 蜜桃视频一区二区三区在线观看| 亚洲av无码一区二区三区乱子伦| 高清无码视频直接看| 久久国产精品一国产精品| 久久精品aⅴ无码中文字字幕重口| 国产成人无码一二三区视频| 天天操夜夜操| 久久久久亚洲精品天堂| 亚洲国产精品久久久久秋霞1| 狂猛欧美激情性xxxx大豆行情| 欧美午夜理伦三级在线观看| 白丝兔女郎m开腿sm调教室| 少妇精品久久久一区二区三区| 久久久久久久99精品免费观看| 97超级碰碰人妻中文字幕| 亚洲色婷婷六月亚洲婷婷6月| 国产熟女一区二区三区五月婷 |